CANADIAN SPITFIRE UPDATE

SpitfireUpdate000.jpg

In 1967, just 22 years after the end of the Second World War, when the producers of the epic motion picture Battle of Britain contracted with the legendary Group Captain Hamish Mahaddie, RAF to wrangle extant Spitfires from across the United Kingdom, there were only 14 airworthy examples in the world—from a full production run of more than 20,000 of all marks. The film production company restored another three Spitfires to round out the roster for the film as not all the owners of flyable Spits were keen on lending them for use in the film. According to Peter Arnold, who, along with Gordon Riley and Graham Trant, authored the two expansive volumes of Spitfire Survivors—Then and Now, 85 Spitfires have flown since that date. That’s a 600% increase in flyable airframes. Today he estimates that 56 Spitfires and Seafires are currently flyable. As early as 1960, author Bruce Robertson in Spitfire—Story of a Famous Fighter put the number of survivors (airworthy and otherwise) at just 80. When a reprint of the same book came out in 1973, that number had grown to 127. Today, Arnold, Riley and Trant have calculated that number to be 282 Spitfires (both flyable and non-flyable) and build projects under way. That extraordinary growth is the result of one thing—the belief held by certain people that a Spitfire should be free to dance the skies and tell the stories of those boys from so long ago. These people are the men and women of the warbird world and the people who fund them. 

There are those who believe that an inanimate object as precious and as central to world history as a Supermarine Spitfire should be grounded, conserved, roped off and displayed to ensure its continued existence for all those who would study it. To fly it or even to take it out of doors is to diminish the lifespan of the object. To display it in anything but its original markings and condition is to alter history. To fly it is risking too much.

Then there are those who think it isn’t an inanimate object at all and should not be kept in captivity, no matter how well-intentioned. Historical artifacts are often experienced only through interpretation and sight. See it, read the plaque, move on. But a Supermarine Spitfire played its role in a very real world—one with smells, sounds and textures as well as visual qualities. As such, it is better understood in its environment—the environment that its pilots lived, fought and died in. With nearly all Second World War Spitfire pilots now dead, soon only the aircraft themselves will remain to tell the story. 

Inanimate objects are those without a soul or life force, like a rock or a dinner plate, but a Spitfire has a soul, one that remains in its bones forever. That soul… that life force spread into its structure the first time a pilot plunked his ass on its seat and stroked its leather-wrapped spade-grip or toggled a switch with a finger tip. The smell of very human sweat and even blood are mixed with those of high octane petrol, glycol leaks and sun-heated paintwork. From that first moment on, the movements of its ailerons and its tail feathers, the pace of its heartbeat, the heights to which it climbed and the vectors it followed were all expressions of a pilot’s desire. We can never look at a Spitfire and see only metal and fabric, for our perspective is altered by history, by youth, by blood and bone. 

Soon, another aircraft will join the growing flock of free-range Spitfires—Supermarine Spitfire Mk IX, RAF serial number TE294. Twenty years ago, nothing more than a pile of rotting metal and loose components, TE294 had almost been subsumed by the earth from which she came—her aluminum and steel structure corroding and breaking down in a scrapyard in South Africa, her wings long gone, component parts stolen or vandalized. Only to someone who could recognize her broken, twisted and rusted bones was she still a Spitfire. In the 1990s, TE294 was rescued, the decline to dust arrested, and the long, long journey to living warbird commenced. From South Africa, her boxed bones travelled to British Columbia, Canada, where a group of passionate volunteers at the Comox Air Force Museum took on her daunting rebuild as a millennium project and as an homage to the wartime pilots of 442 Squadron, a Search and Rescue squadron of the Royal Canadian Air Force still residing on the flight line at 19 Wing, Comox.

It has been five years since work on the wings began at Vintage Wings of Canada. Beneath those extraordinarily sublime and elegantly simple elliptical Spitfire wings ran a labyrinth of ribs, supports, straps, wells, access panels, bays, ch…

It has been five years since work on the wings began at Vintage Wings of Canada. Beneath those extraordinarily sublime and elegantly simple elliptical Spitfire wings ran a labyrinth of ribs, supports, straps, wells, access panels, bays, channels, spars and linkages—held in place by thousands of rivets, each part with specific requirements for gauge, strength and hardness of material. Ken Wood’s methodical and unhurried pace ensured that mistakes did not build upon each other, rendering weeks, months or even years of work scrap. To be in the company of Wood near his wing build throughout this period was to be in a sort of Zen-like zone where voices were lowered, decisions were made only after checks were made and remade, and where craftsmanship and quality of work became a fetish. Photo: Ken Wood from GoPro

The finished Spitfire will be dedicated to and carry the name of Flight Lieutenant Arnold Roseland of 442 Squadron. Roseland was one of only a handful of Canadian fighter pilots who fought both the Japanese and the Germans during the war. “Rosey” Ro…

The finished Spitfire will be dedicated to and carry the name of Flight Lieutenant Arnold Roseland of 442 Squadron. Roseland was one of only a handful of Canadian fighter pilots who fought both the Japanese and the Germans during the war. “Rosey” Roseland was a member of 14 Squadron, a P-40 Kittyhawk unit flying in home defence of Canada’s West Coast and in combat operations in the Aleutian Island chain against Japanese Army and Navy positions on the island of Kiska. Later in the war, 14 Squadron became 442 Squadron, reforming at RCAF Station Rockcliffe here in Ottawa before going overseas and transitioning en masse to the Supermarine Spitfire. Recently, there was a brief article in Aeroplane magazine that stated Roseland had flown more than 65 operational Spitfire ops. That’s not quite correct. In fact, Roseland flew 65 operational flights just in a Spitfire with the letter “K” on the side—“K” being used by at least three aircraft he had flown since 18 March 1944. Roseland’s record in the Spitfire was considerably higher, with 117 flights totaling 130 hours and 10 minutes. He flew more than 50% of his Spitfire operations in a Y2-K–marked aircraft, making that aircraft in the squadron truly “his”. In his nearly two years on P-40s and P-40 Kittyhawks before going to Europe, Rosey had 220 flights and 348 hours. For more on the life and death of Flight Lieutenant Walter Arnold “Rosey” Roseland, click herePhoto: RCAF

Related Stories
Click on image

For a number of years, the Comox team made steady progress, but continued funding of the extremely expensive enterprise became problematic. Mike Potter and Vintage Wings of Canada were approached to offer assistance in terms of expertise, facilities and above all funding. The transition of control to Vintage Wings was not without controversy and detractors, but the Comox Air Force Museum website explains it best: “In 2000, the Comox Air Force Museum, with a grant from the Y2K Millennium Fund, purchased TE 294 and embarked on the Y2K Spitfire Project. The project was funded entirely by donations and grants from the general public and the restoration proceeded slowly. By 2007 only the fuselage and tail section had been completed and it was becoming obvious that a massive infusion of cash would be needed if the project was to continue. In 2008, the Museum presented a decision paper to the Wing Commander of 19 Wing, Comox. It concluded that unless a new owner could be found the Museum would be compelled to shut the project down and dispose of the unfinished aircraft. The Wing Commander accepted the findings, and the plane was offered to other museums and agencies who might be interested in completing the restoration. Vintage Wings of Canada, a Heritage Foundation based in Gatineau, Québec, was willing to take over responsibility for the project in situ and provide the estimated $1.6 million [Considerably more-Ed] required to finish it to flying status.”

The project has made steady progress for a number of years, overcome major setbacks due to poor work of subcontractors and passed many milestones, none of which would have been possible without the funding and support of Michael Potter, founder of Vintage Wings of Canada. Throughout this build, Mike has steadfastly supported, encouraged and funded the Vintech teams in both Comox and in Gatineau. It is because of Potter’s considerable interest in Canadian military aviation history and his substantial financial support that soon the Roseland Spitfire will become the very first true Canadian Spitfire—built from the spars up in Canada by Canadians for Canadians. Without Potter’s involvement in this project, it is fairly certain that it would not be today a Canadian Spitfire, with the project going to Great Britain or the United States. Given the extraordinary connection to the Spitfire we as a nation have, the coming first flight of Y2-K will be a national event, one we hope will be shared with many millions of Canadians to come.

Mike Potter (left) with Second World War fighter pilot legend Wing Commander James “Stocky” Edwards at the Vintage Wings hangar in Gatineau. Potter, a highly experienced Spitfire pilot himself, has provided the massive financial backing that ma…

Mike Potter (left) with Second World War fighter pilot legend Wing Commander James “Stocky” Edwards at the Vintage Wings hangar in Gatineau. Potter, a highly experienced Spitfire pilot himself, has provided the massive financial backing that made this project possible. Edwards, living in Comox, has been an encouraging supporter of the project from the beginning. Photo: Peter Handley

In September of 2014, the fuselage of the Roseland Spitfire arrived at Vintage Wings of Canada, having been delivered from the Vintech Aero team at Comox, British Columbia’s Air Force Museum. It was unveiled at a special dinner where Rosel…

In September of 2014, the fuselage of the Roseland Spitfire arrived at Vintage Wings of Canada, having been delivered from the Vintech Aero team at Comox, British Columbia’s Air Force Museum. It was unveiled at a special dinner where Roseland’s great-grandson Aidan had a first-hand look at the cockpit. Today, Aidan is now Corporal Roseland-Barnes of the Royal Canadian Air Cadets. Photo: Peter Handley

There are many people who have been critical to the rebuilding of this remarkable aircraft, the first of which were the original Y2-K team members from Comox. Their creative and audacious idea now seems close to reality. In addition, the Comox Vintech Aero team—Ken Hazell, Dean Sept, Kaven Tremblay, Henry Bukach and Terry Chester—built the main fuselage, cockpit and tail assembly. The quality of their work took our collective breath away when the fuselage was unveiled at a special hangar dinner in October of 2014.

Now that the end of the rebuild is in sight, I asked Ken Wood how he feels about this incredible accomplishment. “There is so much I don’t know,” he said, “but I have learned a lot in the years that I have spent on this project. The jump from a traditional parts changer AME to a full-on restoration of a vintage warbird of this caliber is unimaginable, requiring a whole other mindset. It’s like learning a totally new trade. You can’t just order the part and install it, you literally have to make the tool before you can even make the part, and the part has to fit. Talk about measuring twice and cutting once! You have to measure ten times ’cause if you screw up, it could have monumental side effects both in time and money. 

Yes there have been many sleepless nights, and there will be more, but to have been given the opportunity to find out what it is I am really capable of is an honour. None of this would be remotely possible without the determination of Mike Potter, for his never failing desire to reach a goal, no matter what. The resources required, not just financial, but knowledge, sub-contracts and personnel are enormous. It is certainly a team effort and I’m glad to be a small part of it. There is still so much to learn.”

The multi-dimensional complexities of building a Spitfire in the Castle Bromwich factory during the Second World War were overcome by jigs, custom tools, forms, molds, templates and thousands of employees. To build Spitfire wings, controls…

The multi-dimensional complexities of building a Spitfire in the Castle Bromwich factory during the Second World War were overcome by jigs, custom tools, forms, molds, templates and thousands of employees. To build Spitfire wings, controls and fuselage components in Canada in the Third Millennium—70 years after the factories were closed—took some ingenuity on the part of Wood. In many cases, he needed to first build tools that would enable him to build the parts or to form three-dimensional magic in metal—tools like the “Fuel Bay Sumptuator”, “Wing-Rib Former 2000 Max”, “Fairey Fastener Locator”, and the world-famous “Bearing Dust Seal Flangetron” (patents pending). Photo: Ken Wood

The truth is, I can’t push Ken Wood to put himself in the centre of this accomplishment, no matter how hard I try. Any attempts are met with a quiet shaking of the head and a sweep of the arm across the hangar floor where his fellow AMEs are labouring. “It’s a team effort” he says, “and no one person is responsible for this… except maybe Mike Potter. I’ve had so much help from some incredibly talented people—advice and support from British Spitfire builder Ian Ward in the beginning along with structural help from Mario Guevremont, systems support from highly experienced warbird engineers Paul Tremblay, Andrej Janik, Guy Richard, Mark Dufresne, Gerry Bettridge, André Laviolette, Pat Tenger and aircraft painter Korrey Foisy. It takes more than mechanics to build something like this though… it needed the support of men like Kevin Forbes, president of Vintech Aero who has listened and supported and had my back on this project all along. Instead of putting up road blocks, Kevin has swept ahead, expediting delivery of key subcontracted components and writing some pretty substantial cheques along the way. Thanks to Shannon Wattie as well for sorting out all the invoices and accounting. The work itself is rewarding, there’s no doubt, but working with these guys has been humbling.”

It takes a village to raise a Spitfire. Some of the mechanics involved today with the Roseland Spitfire project: (standing left to right): Pat Tenger, Ken Wood, Mark Dufresne, Gerry Bettridge. At right is Mike Irvin, who has just joined Vi…

It takes a village to raise a Spitfire. Some of the mechanics involved today with the Roseland Spitfire project: (standing left to right): Pat Tenger, Ken Wood, Mark Dufresne, Gerry Bettridge. At right is Mike Irvin, who has just joined Vintech Aero. Taking a knee: André Laviolette and Paul Tremblay. Photo: Dave O’Malley

There will be a few weeks of paperwork to prepare, bringing everything to a close with “t”s crossed and “i”s dotted, but Wood is confident that before the end of this summer, a completed Roseland Spitfire will be rolled from the hangar and chocked in front of the ramp on a fine and clear flying day. To some who will be present, it will be a beautiful object with a beautiful history. But to others, the ones of us who know in our hearts that she is more than aluminum, steel and fabric, this first Canadian Spitfire will have been born with a remarkable soul—one of indescribable melancholy and exuberant joy. As every piece of her was formed and made fast to other pieces, it was with the memory of young Arnold Roseland in mind. His beautiful life, his sacrifice, his loneliness, his last terror-filled moments have become part of this machine’s story, spiraling in its DNA, amping through its emotional wiring, surrounding its metal like some ghostly magnetic field. As she climbs with a thundering heart into the sky once again, I will think of Rosey and all that he never got to do. I will think of his courage, the heartbreak of his family and his beautiful memory. I will think of his sons and the father they really never knew. 

I will also think of all the effort that it took to get her to this point, the friends I have watched build her, and the man who was determined to make it happen. I will likely cry.

Last year, with the major components completed, Wood began work on the wing tips—a combination of cabinet-work and extreme sheet metal work. The Spitfire’s wing tip structure was made from wood to save vital war materials, then covered wit…

Last year, with the major components completed, Wood began work on the wing tips—a combination of cabinet-work and extreme sheet metal work. The Spitfire’s wing tip structure was made from wood to save vital war materials, then covered with aluminum. Photo: Ken Wood

Last July, the mechanics at Vintech Aero pushed the Roseland Spitfire outside and ran the engine for the first time with Gerry Bettridge at the throttle. A second engine run a week later was conducted by Mike Potter, founder of Vintage Win…

Last July, the mechanics at Vintech Aero pushed the Roseland Spitfire outside and ran the engine for the first time with Gerry Bettridge at the throttle. A second engine run a week later was conducted by Mike Potter, founder of Vintage Wings of Canada. Screen capture from video by Vintech Aero

Lead structures engineer on the Roseland Spitfire, Ken Wood preps the aluminum skin panel for the port side engine cowling. Photo: Peter Handley

Lead structures engineer on the Roseland Spitfire, Ken Wood preps the aluminum skin panel for the port side engine cowling. Photo: Peter Handley

The starboard engine cowling panel is now fully shaped and perfectly fitted, ready for riveting to its underlying structure. Photo: Peter Handley

The starboard engine cowling panel is now fully shaped and perfectly fitted, ready for riveting to its underlying structure. Photo: Peter Handley

Ken Wood (left) and mechanic Pat Tenger place the top cowling panel over the engine bay to assess work needed to create the perfect fit. At this point the cowling panels lack structural integrity and need further shaping and trimming befor…

Ken Wood (left) and mechanic Pat Tenger place the top cowling panel over the engine bay to assess work needed to create the perfect fit. At this point the cowling panels lack structural integrity and need further shaping and trimming before being backed by structural stiffeners. Photo: Peter Handley

A nice view of the recent wing-root fairing work. Once all the remaining skin panels are complete, they will all go to the paint bay where paint specialist Korrey Foisy will match colour, pattern and finish to complete the final paint scheme fo…

A nice view of the recent wing-root fairing work. Once all the remaining skin panels are complete, they will all go to the paint bay where paint specialist Korrey Foisy will match colour, pattern and finish to complete the final paint scheme for Y-2K. Photo: Ken Wood

Wood contemplates his next step as he fits the port engine cowling to the Spitfire’s frame. As beautiful as the polished aluminum is, her final coats of primer and camouflage paint will tell a Canadian story of heroism that will outshine anythi…

Wood contemplates his next step as he fits the port engine cowling to the Spitfire’s frame. As beautiful as the polished aluminum is, her final coats of primer and camouflage paint will tell a Canadian story of heroism that will outshine anything. Photo: Peter Handley

Paul Tremblay (right), Director of Maintenance at Vintech Aero, the AMO responsible for the maintenance of the aircraft of the Michael U. Potter Collection, is the man who assigns the talented mechanics of Vintech Aero to work on the Spitfire’s…

Paul Tremblay (right), Director of Maintenance at Vintech Aero, the AMO responsible for the maintenance of the aircraft of the Michael U. Potter Collection, is the man who assigns the talented mechanics of Vintech Aero to work on the Spitfire’s systems—engine, fuel, controls, landing gear and propeller. Photo: Peter Handley

Never hurried, Wood contemplates his next move when re-attaching the Spitfire’s propeller. More than half a year ago, the Spit was towed outside and its big Rolls-Royce Merlin was ground run—twice. Photo: Peter Handley

Never hurried, Wood contemplates his next move when re-attaching the Spitfire’s propeller. More than half a year ago, the Spit was towed outside and its big Rolls-Royce Merlin was ground run—twice. Photo: Peter Handley

The Spitfire’s cowling substructure is prepared to receive the finished cowlings. Photo: Dave O’Malley

The Spitfire’s cowling substructure is prepared to receive the finished cowlings. Photo: Dave O’Malley

Two beautiful roses. The Roseland Spitfire, Y2-K (in background), now shares the hangar with Spitfire XVI (AU-J in foreground), once known in the warbird world as the Rose Garden Spitfire. Actually, there are three beautiful roses ass…

Two beautiful roses. The Roseland Spitfire, Y2-K (in background), now shares the hangar with Spitfire XVI (AU-J in foreground), once known in the warbird world as the Rose Garden Spitfire. Actually, there are three beautiful roses associated with TE294. Rose is also the name of the wife of the late Mark de Vries, the man who recognized the potential in the pile of deteriorating Spitfire bones that he found in a wrecking yard in South Africa. Soon, these two Spitfire Roses will fly together over Gatineau skies, telling the world of Canada’s fighter heroes of the Second World War. Also in the hangar is the Robillard Brothers P-51 Mustang (Y2-C), also painted in the markings of 442 Squadron, which had converted to the Mustang by war’s end. We will also see two 442 Squadron fighters together again for the first time since the days of the Canadair Sabre. Photo: Peter Handley

The mechanics were quick to point out that there was to be no photos of the work in progress... so I made sure to grab a shot of that sign too. Photo: Dave O’Malley

The mechanics were quick to point out that there was to be no photos of the work in progress... so I made sure to grab a shot of that sign too. Photo: Dave O’Malley

DONATE NOW
and keep ‘em flying!

All together…
VOLUNTEER TODAY!

Learn the benefits of
MEMBERSHIP

 
Previous
Previous

EVERY PICTURE TELLS A STORY

Next
Next

BOTTLE OF HEARTBREAK —The Story of Albert “Tiddles” Brown